
Analog-Digital System Bridge
Features

Remote Control Room Solution
This is the right solution if you want to connect one or more remote control (donor) radios located far from the control room.
High Latency Enviroments
Normally, your radio network must comply with the 60 or 90 ms delay requirement. However, it is not always achievable. If the latency on your network exceeds 90 ms, you can consider using IP Gateways, which allows you to work on higher latencies (up to 300 ms).
Ideal for Analog-to-Digital Migration
Most analog radios can be connected to your MOTOTRBO system via IP Gateways (Agents) for smoother migration from analog to digital radios.
Rack Mounted Unit
The A001 IP Gateway fits in standard 19'' racks, with the control radio embedded in the gateway case.
Interface to Other Radio Platforms
You can connect your MOTOTRBO network to other analog or digital platforms using gateways. Each gateway works in conjunction with a control radio and gives you one radio channel. You can then patch these channels to create a seamless integrated environment.
Made by Neocom
The hardware has been developed, tested and assembled in our workshop. It means that we are fully responsible for its performance, and can assist you if you have any problem setting it up. It also means that we have these products in stock and are able to fulfill any order at any time, and ensure the fastest possible delivery.